The 0xc0000001 blue screen in Windows is related to the hard drive controller. If you ever get this blue screen, the first thing to check is if the drive standard was changed in the BIOS or UEFI. If it was AHCI but you changed it to ATA (or IDE), change it back and see if the blue screen goes away. This blue screen can also appear after you clone a hard drive. Some computers do not support SSD’s even if it using the SATA cable. And if you clone a hard drive to one using the M.2 interface, this problem can appear.

By the way, if you accidentally bricked your CD/DVD/Blu-Ray drive with a firmware upgrade, you will need to use ATA/IDE mode to unbrick it.

Fortunately, in Windows 10 there is an easy way to change your hard drive controller type. There isn’t much to like about Windows 10, but this is one thing it does make easier. Before you make the change in your BIOS, use the MSCONFIG program to boot into safe mode the next time. Change the setting in the BIOS, boot once in safe mode and use MSCONFIG to undo the safe mode setting, and then you should be able to boot as normal. However, if you cannot get into Windows or the BIOS, hopefully you can get into the Windows recovery environment. (I still say that the absolute dumbest thing Microsoft ever did was disable the pre-boot F8 button.) In the recovery environment, look for the startup settings in the menu options. When the computer boots, choose safe mode in the blue screen of menu options.

If 0xc0000001 persists, then you will have to try the SFC command, system restore, registry backups, and the other usual generic repairs.

Advertisement