I had an older but still good computer with two internal hard drives: an old Western Digital Green hard drive and a newer WD Black hard drive. The Green drive had the page file and important backup files. This being Windows 7, it had a full system backup on the WD Green and a Quickbooks backup. The computer kept giving the blue screen error 0x0000007a KERNEL_DATA_INPAGE_ERROR, which according to Microsoft is caused by bad hardware or bad RAM. So my first thought was the WD Green drive was bad because, again from Microsoft, the blue screen “indicates that the requested page of kernel data from the paging file could not be read into memory.” Since the page file was on the old WD Green drive and since Windows had trouble reading the page file, it must be that drive or bad RAM.

Turns out, there were 3 causes of this blue screen. The WD Green drive was, in fact, bad. I put it in my computer and tested it to be sure, and it was bad. So I bought a SSD, shrank and cloned the WD Black drive to it, and repurposed the WD Black drive into what the WD Green drive was being used for. Except I put the page file on the SSD. After doing this, the same blue screen still appeared. So the second guess was bad memory. Which also, in fact, was defective as a memory test discovered. So I fixed that problem as well.

But the same blue screen kept appearing. I finally figured out the hard drive cable was bad. I replaced that cable and the machine hasn’t had a blue screen since. At the end of the day I concluded that while all the bad memory and bad hard drive did not help, it was not the root cause of the blue screen.

Advertisements